Seals

KLINGER Sil C 4300
KLINGER Sil C 4400
KLINGER Sil C 4430
KLINGER Sil C 8200
KLINGER Top Sil ML1 multilayer
KLINGER Quantum

Multi-layer sealing material with extended service life and improved elasticity at high temperatures. Excellent behavior with every application.

Composition and application
Revolutionary combination of synthetic fibers and various elastomers connected in a multilayer structure. The outer layers contain a HNBR filler that ensures long lasting elasticity, high temperature resistance, reduced brittleness, aging resistance and oxidation. The middle layer contains NBR filler, which ensures high density, strength, low creep at load and high load capacity. Suitable for use in oils, water, steam, gas, salt solutions, fuels, alcohols, organic and inorganic acids, hydrocarbons, lubricants and refrigerants.

Certificates
BAM, KTW, DIN-DVGW, TA-Luft , WRc, Germanischer Lloyd

Technical data
Compatibility ASTM F36 A: 9%
Elastic recovery ASTM F 36 A min: 50%
Resistance to compression DIN 52913 (50 MPa 16h / 300˚C): 28 MPa
Resistance to Klinger 50 MPa
Reducing the thickness at 175˚ C: 8%
Reducing the thickness at 300˚ C: 15%
Containment according to DIN 3535/6: 0,1 mg / s.m
Swelling ASTM F 146 (Oil JRM 903: 5h / 150˚C): 4%
Swing ASTM F 146 (Fuel B: 5h / 23˚C): 8%
Density: 1.7 g / cm3
Base thickness: 2 mm

KLINGER PSM

Expanded graphite, pressed bilaterally on a metal insert of double-pierced stainless steel, 0.1 mm thick. Suitable for applications with high temperatures and vibrations. The material has a non-stick coating, it is always elastic and does not crumble. It allows tightening after assembly.

Composition and application
Graphite with pierced stainless steel insert 0.1 mm.
Resistant to hot water, steam, oils, hydrocarbons, gas and a number of other chemicals.
Certificates
DIN-DVGW, BAM
Firesafe по BS 5146, WRc approval

Technical data
Fastening ASTM F36 A: 31-33%
Elastic recovery ASTM F 36 A min: 4.9-5.1%
Pressure resistance DIN 52913 (50 MPa 16h / 300˚C): 48 MPa
Containment according to DIN 3535/6: 0.8 mg / s.m
Purity: 98%
Density: 1.0 g / cm3
Base thickness: 2 mm

KLINGER Expert
Computer program to support material selection, standard fittings size and torque calculation of bolts. Translated into Bulgarian.

Sheet dimensions
1000 мм х 1000 мм
1500 мм х 1500 мм

KLINGER Milam

High temperature milling seal with metal insert of double-pierced stainless steel 0.1 mm thick and impregnated silicone.

Composition and application
Mica with metal insert of double-pierced stainless steel 0.1 mm thick and impregnated with silicone. It is used in applications with temperatures up to 900 ° C.

Attention: For the good functioning of the trimmings, the minimum temperature must be 100 ° C.

Certificates
Germanischer Lloyd and others

Technical data
Fastening ASTM F36 J: From 12 to 25% depending on the thickness of the garnish
Elastic restoration ASTM F 36 J min: 30 to 45% depending on the thickness of the finish
Pressure resistance DIN 52913 (50 MPa 16h / 300˚C): 30 to 40 MPa depending on thickness
Swelling ASTM F 146 (Oil JRM 903: 5h / 150˚C): 5 to 15% depending on thickness
Density: From 1.8 to 2.1 g / cm3 depending on thickness
Base thickness: 2 mm

Sheet dimensions
1000 мм х 1200 мм

Thicknesses:
1,3 мм, 2 мм, 3,2 мм

KLINGER Top-chem 2000

A modified teflon seal that ensures flange bond tightness in chemically aggressive media with high temperature and high surface pressure. This material avoids the disadvantages of pure Teflon, which occurs at high temperature and deforms. KLINGER Top Chem remains elastic in cryogenic applications (temperatures up to -200 ° C).

Composition and application
Modified teflon.
Resistant to highly acidic and alkaline environment at temperatures ranging from -200 ° C to 260 ° C.

Modified teflon.
DIN-DVGW, KTW
Germanischer Lloyd and others

Technical data
Fastening ASTM F36 A: From 2 to 16% depending on the type.
Elastic recovery ASTM F 36 A from 35 to 55% depending on the type.
Resistance to compression DIN 52913 (50 MPa 16h / 300˚C): 35 Mpa
Reducing thickness at 23˚ C: 2 to 10% depending on the type.
Containment according to DIN 3535/6: From 0.1 to 0.5 mg / s.m depending on the type.
Swelling ASTM F 146 (Oil JRM 903: 5h / 150˚C): Depends on the specific fluid.
Density: From 1.7 to 3.0 g / cm3
Base thickness: 2 mm

Sheet dimensions
1500 mm x 1500 mm

Thicknesses
1mm, 1.5mm, 2mm, 3mm

Gland packings for valves and pumps
A wide range of gland packings for valves and pumps that are suitable for a variety of environments and operating conditions.

Composition and application
Gland packings made of aramid fiber, graphite, teflon, inconel reinforcement, lubricants, glass fibers, etc., as well as combinations of said materials
They are suitable for large temperature amplitudes (from -240 to 650 ° C), various chemicals, high pressure and speed (for pumps) for chemical, , quarries, gas environment, ball mills and others.

Sizes
Cross section: 3 mm x 25 mm
Length: 8 meters in a box

Weight
Under 9.5mm 1kg / box
9.5mm to 12.5mm 2kg / box
Over 12.5mm 4kg / box

Delivery
Of the following gland packings

K3222W – valves for gland packings and graphite pumps and inconel reinforcement; suitable for steam, acid and alkaline media; the product has an unlimited storage life and is environmentally friendly. Applied technical information.
Cross section: 6х6мм, 8х8мм, 9, 5х9, 5мм, 11х11мм

K4322 – арматура за набивки и помпи от тефлон и графитен лубрикант; подходяща за химически приложения. Приложена техническа информация.
Cross section: 8х8мм, 10х10мм

Technical recommendations
If you need additional technical information or want advice on a specific issue, please contact us at the addresses given. For better service, please be prepared to answer questions about:
1. Valve and pump type
2. Working and testing pressure
3. Temperature – constant or variable
4. Pressure and temperature cycling
5. Environment and concentration
6. Operating speed
7. Special requirements
8. Specific packaging conditions.

Gland packing extractors:
We also offer extractors for gland packing of different thicknesses. One set consists of two gland packing extractors, two extractors are required to remove one gland packing

Available on stock
1. Extractor №1 /for gland packing extractor 6,5 – 9,5 мм/
2. Extractor №2 / for gland packing extractor 9,5 – 12,5 мм/
2. Extractor №3 / for gland packing extractor 12,5 – 16,0 мм/